FRP Remove using EMMC direct by Hydra Tool
1. Run Hydra Main Tool.
2. Choose EMMC Direct.
3. Dissemble device, connect with EMMC pin out to the computer.
4. Choose the PORT
5. Choose "Serice"--> "Factory Reset Protection"
6. Choose "Auto" from Method and Option.
7. Click on "Execute"
8. Wait until the process is completed.
Note: You can use any supported devices with this method.
Screen Short:
1. Run Hydra Main Tool.
2. Choose EMMC Direct.
3. Dissemble device, connect with EMMC pin out to the computer.
4. Choose the PORT
5. Choose "Serice"--> "Factory Reset Protection"
6. Choose "Auto" from Method and Option.
7. Click on "Execute"
8. Wait until the process is completed.
Note: You can use any supported devices with this method.
Screen Short:
