Xiaomi mi8 lite, new fw, frp removed with success, trick inside

Hello to @All this version of Xiaomi "MI8 Lite" with FRP, had inside one firmware too much high, so was Not accepting Loader and AUTH.

I've solved with Success from "OCTOPUS FRP TOOL", (Many others Tool/Box/Dongle Failed), by selecting "GENERAL_QUALCOMM" Device, how showed in Screen and Log.

1) First attempt by selecting right model "MI8 Lite":

Quote:

---

Platform: XIAOMI
Selected model: MI 8 LITE
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM61
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008C0E100000000
QC CPU: Snapdragon 660 SDM660
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: FEFFF73F
Checking request..
Authentification is not available for this phone model!
Operation was failed!
Performed by 1.9.8.0 Software version.

---

2) Tryed with "GENERAL QUALCOMM RESET FRP METHODS" full Success

Quote:

---

Work ID: 0000000000448C6B
Platform: __GENERAL RESET FRP METHODS
Selected model: QUALCOMM EDL AUTODETECT
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM61
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: A7DE8C37
QC HW ID: 0008C0E100000000
QC CPU: Snapdragon 660 SDM660
QC HASH: C17729CF23661F20451978FA397BF5BCEBD4C9C2408692AE7D 116127312C529A
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: FFFFFFFF
Checking request..
Reading partition...
Reading info...
Android version: 10
Firmware version: V11.0.2.0.QDTMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.8.0 Software version.

---

TEST POINT: