• Firmware Asus A007 Read By UMT •


Firmware Asus A007 [ Zenfone Live ] MSM8226 6.0.1

:laser:Read By Ultimate Multi Tool - QcFire
:fencing:
:rapture:









TesT Poins



+
+
+





InFo



Code:

Operation    : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1809100 [8x10] 41002900
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8x10_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8x26, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus [msm8226] [ASUS_A007]
Software    : MMB29P.WW_Phone-13.1407.1711.47-20171208, WW_Phone-13.1407.1711.47-20171208 [Sat Dec  9 00:27:23 CST 2017]
Android Ver.    : 6.0.1
Patch Level    : 2017-11-06
USERDATA    : Normal
You can use RESET LOCKS to remove Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 5.5




InFo Read




Code:

Operation    : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1809100 [8x10] 41002900
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8x10_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8x26, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Reading Partition Table...OK
USERDATA    : Normal
Reading Device Information...OK
Device    : asus [msm8226] [ASUS_A007]
Software    : MMB29P.WW_Phone-13.1407.1711.47-20171208, WW_Phone-13.1407.1711.47-20171208 [Sat Dec  9 00:27:23 CST 2017]
Android Ver.    : 6.0.1
Patch Level    : 2017-11-06
Reading [modem]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [DDR]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [misc]...Done
Reading [persist]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [cache]...Done
Reading [system]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to    : c:\umtool\qcfire\Read\asus_MMB29P.WW_Phone-13.1407.1711.47-20171208_2017-11-06\
Operation Finished.
QcFire Ver. 5.5









Firmware







EFS File




Attached Images